Finally got around to mounting the Intel NUC under my desk. Put it in a position where I can still access it as needed, but this gets it off the desk out of the way.
I used an extra bit of timber, as the screws I had were a little longer than required, so this buffers out that space so they don’t come through the top side of the desk. I also screwed it up using the 75×75 vesa mount position, as using the 100×100 vesa position made the machine a bit free to move.
Turned out quite awesome. Now i just need to tidy the cables out the back and get them lifted up with something so they don’t hang with that weight out of rear.
Currently working out a design to build a nice under mount shelve for some hardware at the back of the desk, since these old Ikea Galant desks have significant depth to them.